TOWA
Bobbin Case Tension Gauge
BTG3-TOW
If you're struggling to get the right tension out of your
Longarm Quilting Machine,
then this is the perfect tool for you!
M-style Towa Bobbin Tension Gauge (TM-M) is used to measure bobbin tension for longarm quilting machines. This model is for use with M-style bobbins only.
Made in Japan.
The TOWA bobbin tension gauge puts a numerical value to the amount of tension placed on a bobbin.
This is very helpful as it allows you to quantify the amount of tension placed on a bobbin thread,
so you have a benchmark to base bobbin tension.
To measure the tension of your bobbin,
place your bobbin inside the bobbin case with the thread unwinding the correct way,
then insert into the TOWA gauge.
Pull your bobbin thread and guide it underneath the bottom wheel,
over the top of the top wheel and then inside the catch.
As you pull the thread to the side, you will see the top wheel move down while the numbers increase.
The higher the number, the tighter the tension.
To loosen the tension, turn the screw in small increments counter-clockwise.
Think, lefty-loosy righty-tighty.
We recommend making small adjustments when tightening or loosening the tension screw.
Think of the screw as a face of a clock,
when adjusting, adjust in 15 minute increments.
